|
The Signal Generator software that runs on your PC and controls the USBee Digital Test Pod is a powerful addition to any design and debugging development.
The Signal Generator software provides the following functions:
- Tiny USBee Pod (2.1" x 1.3" x 0.5") connects to your hardware
- USB connects the pod to your PC
- Signal Generator software runs on your PC
- Generate Sample Rates (10ksps to 1.5Msps)
- 8 channels
- Output Sample Clock
- Waveform display lets you "Draw" the signals you want (above)
- Also import text files containing data to generate
- Save, Open and Print data and settings
- Movable cursors for easy measurements
- Can input files saved by the Logic Analyzer module to "playback" the capture
|
Specifications for the USBee running the Signal Generator Module
| Maximum Sample Rate |
1.5 Million samples
per second
|
| Number of Channels |
8
|
| Internal Clocking |
Yes
|
| External Clocking |
No
|
| Number of Samples |
2048
|
| Available Sample Rates |
1.5Msps
1Msps
500ksps
200ksps
100ksps
50ksps
20ksps
10ksps
|
| Sample Clock Output |
Yes
|
| Power Supply Outputs |
Regulated 3.3V
5V
|
| Test Leads |
Twelve 9" leads with 0.025" square sockets
|
| USB Cable Length |
6 Feet
|
| Dimensions |
2.1" x 1.3" x 0.5"
|
| Minigrip Test Clips |
12
|
| Channel Output Drive Current |
4mA
|
| Output High Level |
> 2.7V
|
| Output Low Level |
< 0.8V
|
The USBee Digital Test Pod does not need an external power supply. The USB bus supplies the power to the pod, so your PC will be supplying the power.
Not fast enough for you?
Try the USBee SX
|
